Chengxin's Leading PEEK Sealing Component Solutions

Precision Molding | Withstands High Temperatures and Heavy Loads

Is your equipment unable to function properly after switching to standard engineering plastics?Insufficient heat resistance and mechanical strength...causing the product to soften, deform, or even fail due to fatigue under extreme operating conditions?

Are you hesitant to use PEEK because you lack practical experience with its properties?SettingsIs hesitation causing your R&D timeline to stall?

Are you having trouble findingA manufacturing partner with expertise in the physical properties of PEEK...resulting in finished products that fail to meet standards and a waste of expensive materials?

The Chengxin Sealing King PEEK Molding Team specializes in the development and mass production of high-performance engineering plastic parts, utilizing a variety of advanced materials—including PEEK—to help customers find component solutions that are lighter and more durable than metal for applications in high-temperature, high-load, corrosive, or high-purity environments.

Our team has a background in materials engineering and precision molding and is well-versed in PEEK’s heat resistance, mechanical strength, dimensional stability, and chemical compatibility. We can assist you in balancing performance, cost, and manufacturability right from the design phase, thereby minimizing trial-and-error.

01

02

03

04

05 More Parts Product List

Displayed by seal type.

Spring-Assisted Sealing Assembly

4 products

Built-in spring Spring-Energized Lip Seal Piston Seal Piston Rod Seal

Hydraulic Cylinder Seal Kit (Reciprocating)

8 products

Seal Lip Body Piston Seal Piston Rod Seals Anti-extrusion ring Buffer Seal (Buffer) Guide/Wear Ring Dust seal Guide/Wear Ring (Wear/Glyd/Guide)

Seal Module for Rotating Shafts

5 Products

Radial shaft seal (oil seal) Spring-Assisted Rotary Seal Rotary Shaft Seal (Radial Shaft Seal/Oil Seal) Cartridge/Labyrinth Seals System-Level Composite Seal (Integrated Carrier)

Static Flange / Valve Seals

7 products

O-ring/Square ring Flat Washer/Rectangular Washer Anti-extrusion/Support Ring Static Auxiliary Ring Valve Seat/Valve Seat Ring Buffer/Stop Ring (Buffer) Static O-Ring

Health / Chemical Industry / Vacuum and External Protection

5 Products

Sanitary Sealing Vacuum sealing lip Integrated Carrier Sealing Outer Cover/Spacer Ring Sanitary-Grade Seals (Food/Pharmaceutical)

O-ring

4 products

O X/Quad-Type Ring O-ring spare parts (outer ring) Dust Seal (Wiper/Dust)

1. Precision Injection Molding

Suitable for small- to medium-sized PEEK parts with complex geometries and high-precision requirements, including gears, sliders, insulating housings, support components, and structural parts. The gate, cooling, and demolding designs are adjusted to meet product functionality requirements and mass production strategies, ensuring both aesthetic quality and dimensional stability.

2. Machined Parts Manufacturing

We provide CNC precision machining for plates, bars, and tubes, catering to parts that are large in size, have unique structures, or require low-volume, high-variety production. This process can be combined with injection molding, reserving critical precision surfaces for machining to balance cost and accuracy.

3. Material Selection and Structural Design Consultation

Compare PEEK with other engineering plastics or metal solutions (such as stainless steel, PEK, PTFE, etc.) to help strike a balance between strength, heat resistance, wear resistance, and cost; provide specific recommendations to reduce the risk of failure during molding and use.

4. Coordination of Preliminary Pilot Production and Reliability Validation

We support small-batch prototyping and multiple rounds of optimization, along with product lifespan, temperature resistance, and chemical resistance testing. Once validation is complete, we establish standard manufacturing conditions and inspection specifications to ensure a smooth transition to mass production.

Project	General-Purpose Engineering Plastic Parts	Chengxin Sealing King PEEK Precision Molding Solutions
Maximum Temperature Resistance and Strength	Suitable for use in moderate-temperature environments; prone to softening and deformation at high temperatures	Maintains strength and rigidity even when exposed to high temperatures for extended periods
Chemical Resistance and Moisture Absorption	Sensitive to certain liquids; dimensions are prone to change when exposed to moisture	Resistant to most chemical media, with low moisture absorption and dimensional stability
Experience in Molding and Processing	Primarily works with general-purpose plastics; has limited experience with PEEK	High-temperature processes and quality requirements specifically tailored for PEEK
Assistance with Design and Material Selection	Production is primarily based on existing drawings	Can help optimize everything from materials to structural design
Project Support Methods	One-time orders require less assistance with onboarding	Project-based management with ongoing support from prototyping through mass production

Requirements Interviews and Requirements Inventory

Understand your application environment, existing materials, and component failure modes, and clarify the objectives and expected benefits of adopting PEEK.

Design and Materials Evaluation

We provide recommendations for material and structural optimization based on the existing design, and, when necessary, assist in adjusting wall thickness, tolerances, and fit types to fully leverage the inherent properties of PEEK.

Quotation and Project Kickoff

We provide comprehensive quotes and schedule plans based on part complexity, manufacturing process selection (injection molding/machining), mold requirements, and estimated production volume.

Prototyping, Testing, and Optimization

Conduct a small-scale pilot production and testing, and adjust the design or process parameters based on the actual operating results until the functional and service life requirements are met.

Mass Production Implementation and Technical Support

Establish standardized process conditions, inspection items, and documentation procedures to ensure consistency; assist in evaluating material upgrades, design refinements, or cost optimization strategies to enhance product competitiveness.

If you’re developing critical components that must withstand high temperatures, heavy loads, or harsh chemical environments, but are stuck on material selection or molding, please feel free to share your drawings and specifications with Chengxin Sealing King so we can work together to evaluate how PEEK can help upgrade your product.

Contact Chengxin Sealing King today to discuss your product’s application, the materials you’re currently using, and any challenges you’re facing. We’ll provide specific recommendations and collaboration proposals regarding “whether PEEK is suitable, how to design the product, and how to scale up production,” enabling high-performance materials to create a real competitive edge for your product.